Get Technical Support for Printer





CALL TOLL-FREE NO. 1-844-856-7490

internet phone service

123 HP Deskjet 2130 Printer Setup and Installation

Un pack the dj2130 printer from its packaging and keep the power cords ready to connect in its respective places. Now, place the cords firmly into the wall sockets so that there are no loose connections or any power issues with the devices. After connecting the cords, press the Home button on the left-hand corner of the printer.

How to set up the printer?

  • When you switch on the printer for the first time, it may make some noise.
  • Once you see the home screen, use the arrows next to the printer’s control panel to choose the language, country, and region. Now, touch the OK button.
  • The printer screen will now as you insert the ink cartridges.
  • Lift the ink cartridge’s cover by using the cutouts on the sides of your printer.
  • Look at the labeling on the back cover of the cartridge and install the tri-color cartridge initially.
  • Remove the protective tape covering the electrical contacts and ink nozzles. (NOTE: The color on the locking levers should match the color displayed on cartridges.)
  • Slide the ink cartridges slowly into their respective slots and push it till locks into its place.
  • Use the same process to install the black cartridge as well.
  • Once you finish installing the original HP cartridges, a message box appears on the Control Panel. Click on OK
  • Load the stack of paper in the input tray. Now, the printer prints an alignment page.
  • After the alignment page is printing, scan it by placing the pace print side down on the scanner glass.
  • Once the alignment page is scanned, a message box which reads, ‘Alignment successful’ will appear on the printer’s control panel. Press Ok button to continue.
  • Users are now allowed to connect the printer o a network wirelessly or Ethernet or USB.

Once the basic setup is complete, install the printer software by visiting or by inserting the CD which came with the printer. Follow the instructions on the screen to complete the printer installation process. Download the driver software from the website link or 2130.


Download the driver software from the following link or 2130 or just click download button below.

You can also download the user guide or manual from the following link or 2130 or just click the download button.

How to cancel the print job?

In case you want to stop the printing process, you can do it in a jiffy using your iPhone.

  • Press the Home button of your iPhone twice.
  • The apps that are open and working will be displayed on the screen.
  • Now, choose Print Center and tap on it.

Once, the Print Center app opens, touch Cancel Printing option to stop the print job.

Print from a Wireless-Capable Computer

Without connecting to a wireless network, one can print wirelessly with the use of HP wireless direct in their HP Officejet Pro printer.

How to print from a wireless-capable computer (Windows)?

  • Ensure that the HP Wireless Direct option is switched on.
  • Now, the Wi-Fi connection on your Deskjet 2130 printer needs to be switched on.
  • From your computer, connect to a new network as you usually do.
  • Choose the wireless network you would connect to. (NOTE: Select the name of your printer which will be listed as Hp-Print0**-ENVY XXXX.)
  • When prompted, enter the security code for the network.
  • If your printer uses the network through a USB connection, then do the following.
    1. Based on the operating system you use, do the following,
      1. Windows 8: Start – – > app bar – – > All Apps – – > Printer Name – – > Utilities.
      2. Windows 7, Windows Vista and Windows XP: Start – – > All Programs – – > HP – – > Printer Folder.
    2. Choose Printer Setup & Software and then tap on Connect a new printer.
    3. Select Wireless option in the Connection Options dialog box. From the list displayed, choose the HP printer software.
    4. Now, follow the on-screen instructions to complete the process.
  • Print the document that you need to.

How to print from a wireless-capable computer (OS X)?

  • Ensure that your HP wireless direct is switched on.
  • Switch on AirPort.
  • On clicking the AirPort icon, select the HP wireless direct name which is listed as HP-Print-**-ENVY XXXX.)
  • Add your HP printer.
    • Under the System Preferences section, choose Print & Fax or Print & Scan, depending on the operating system you use.
    • Select the +  (plus) symbol on the left-hand corner where the printers are listed.
    • Tap on the printer you want to use and then click Add.


  • Click on the Start button on your desktop screen.
  • On the search menu bar, type ‘Add Printer’.
  • A new dialog box appears and asks which type of printer you want to install.
  • Select Add a network wireless or Bluetooth printer.
  • Select ‘Use an existing port’ and click Next.
  • If you have selected USB connection, then choose Add a local printer.
  • From the list of options available, choose the printer name and then click Next.
  • A new dialog box opens asking you to install the printer driver.
  • Go to the Windows update tab and then tap on HP or Hewlett Packard.


  • Click on Setup and the select Network or Wireless menu.
  • From the list of options available, tap on Wireless Setup Wizard.
  • The list of wireless networks will be available on screen. Choose the one which you want to use.
  • When asked, enter the WEP password of the network key of the wireless connection.
  • Your printer will be connected to the wireless network soon. After it gets connected, print a test report to see if the printer works fine.
  • Also, it is not needed to install the MAC printer driver separately. It gets installed automatically when you update the Apple device software.
  • Now, connect your HP printer and your Apple device with the use of an USB connection.
  • Connect other devices to the Internet through wired or wireless connection.
  • Go to the Menu option in the Apple device and touch software update. Otherwise, choose About this Mac and then select Software updates.
  • Now, choose Install.

How to select your printer on your MAC?

  • Open the Apple menu and choose System Preferences.
  • Go to the Hardware tab and then choose Print and Fax.

When your HP printer is listed,

  • Roll your pointer on (-) minus sign and remove the printer. Now, click on the (+) sign and Add a new printer.
  • Choose the printer name when it appears on screen.
  • Now, click on OK to continue.

When your HP printer is not listed,

  • Roll your mouse pointer near (+) sign and then click on Add Printer or Scanner.
  • Choose any one of the option when the printer names appear.
  • Click on Continue option.
  • On the Print Using box, choose the printers name.
  • Now, download and install the Apple printer software.

  • On your device, select Network or Wireless menu.
  • Tap on Wireless Setup Wizard.
  • When asked, enter the SSID (network name) and WEP key (password).
  • Your printer will be connected to the wireless network shortly.
  • Now, print a test report to check if everything is fine with the printer.

Solving Print Problems

When the printer is not printing (nothing prints)

  • If print jobs are stuck in the print queue, then cancel all the documents in the queue and reboot the computer. Try printing a page after the reboot process is done.
  • If your printer switches off during printing, then an alert message should pop up on your computer screen. If it doesn’t, then there is a problem in the HP software that you have installed. Uninstall the software and reinstall it to avoid further problems.
  • It is always imperative to check if all the cable connections are secure and tight. If any connection is loose, replace it with a new cable.
  • If the blue light on the Wireless icon isn’t blinking, then you need to check your printer’s wireless connection. Try printing a Wireless test Report to diagnose and troubleshoot the problems with your printer.
  • Check if the firewall software installed on your computer is hindering the communication between your computer and printer. In that case, disable the firewall temporarily and go ahead with the print job. Switch on the firewall once you have completed printing the pages.
  • If your printer is still not responding after performing the above-mentioned steps, then, try restarting the computer as well as the printer.

When something on the page is missing or incorrect

  • Check the length of the USB cable and the printer location. Sometimes, the high electromagnetic fields generated by the USB, can cause slight distortions and spoil the quality of the printout.
  • In that case, move your HP printer away from the electromagnetic field.
  • You are recommended to use a cable that is less than 3 meters long to lessen the effects of the electromagnetic field.


We are the third party internet service provider who provides customers with technical and troubleshooting assistance for the hardware and software problems. All the trademarks and images that are mentioned on the website are only for the information to the users. We disclaim that any ownership or rights to any third parties unless stated. Download the driver software from the following link or 2130.