HP-Officejet-Pro-9025

HP Officejet Pro 9025 Driver Installation

123 HP Ojpro 9025 Driver Installation

               One can directly install the driver from our support site or CD/DVD provided with the HP printer. It all depends on your convenience. Our support site will have procedures for both methods. Select the model number of the printer in the search box and download the printer driver.

123 HP Ojpro 9025 Ink Cartridge Installation

               Pop out existing ink cartridge from the slot gently, if you have installed already. Push the ink cartridge inside the respected slots. You will hear the click when it has fixed properly.

Ink Cartridge Installation

  • Unlock the ink cartridge door and lift the top. You have to place the ink cartridges under the center lid.
  • Slide the door to view the ink cartridge slots. Lift the top lid to place the new ink cartridges.
  • If you have the ink cartridges already installed on it, remove the one ones.
  • To remove, track these guidelines. Gently, knock it from its position to remove it.
  • After removing the old ones, clean the place with a lint-free cloth.
  • Take the new ink cartridges from the cover and pop it in one by one.
  • Avoid touching copper colored area and ink nozzles while placing the ink cartridges in the slots.
  • Based on the ink number, place it in the right slots.
  • Close the cartridge door and slide back into the position.
  • Align the black ink cartridges on the right side and color cartridges on the left side.
  • Maintain the best daily practice for the best quality prints. Before every print job, make sure you have enough ink and paper in the slot.
  • Align the ink cartridge using the HP Solution Center. HP Solution Center is the place where you can align the ink cartridges.
HP-Officejet-Pro-9025

123 HP Officejet pro 9025 Services

The services available for Ojpro 9025 are basic services like print, scan, fax, and copy. The touch screen allows the user to access the Ojpro 9025 easily without putting much effort.

Printer Setup

               The steps involved in the printer setup are easy to carry out and it will work out well for the first-time printer users.

Driver Download

               The HP Ojpro 9025 printer needs the right software to work efficiently. The software is available for all models of Officejet Pro on our support website.

Wireless Setup

               The network connection is must for any HP Printers to communicate with the computer, laptop, and mobile device. Choosing the method is your choice, from the available modes.

Troubleshooting

               Encountering the printer issue is simple when you analyze the issue deeply. It is stressful for a user when the printer does not print and having issues with print quality. But we are here resolve the issues that you face.

HP-Officejet-Pro-9025

HP OfficeJet Pro 9025 Printer Setup – Intro

123 HP Ojpro 9025 First Time Printer Setup- Intro

               If you are looking for the steps on first-time printer setup, the guidelines provided on the website will help you with HP Printer Setup. Compose the print jobs, and add to the print queue, and start printing.

Step 1: Unboxing Printer

               Open the parcel that you have received with the HP ojpro 9025 Printer. With the printer accessory checklist, check you have received all the accessories.

Step 2: Secured Connection

               Check the wall outlet for fluctuation. If the flow of current is optimum, connect to it with the help of the power cord.

Step 3: Installation of Ink Cartridges

                Before starting the process, have the replacement cartridges handy. Lift the scanner cover, and you will find the ink cartridge access door. Insert the new ones there with caution.

Step 4: Load Enough Papers

               Arrange the paper with the printable side on the top, and stack it slowly without exceeding the height of the guide.

123.hp.com/oj4650

123 HP OFFICEJET 4650 PRINTER SETUP AND INSTALLATION

Un pack the HP Officejet 4650 printer from its packaging and keep the power cords ready to connect in its respective places. Now, place the cords firmly into the wall sockets so that there are no loose connections or any power issues with the devices. After connecting the cords, press the Home button on the left-hand corner of the printer.

How to set up the printer?

  • When you switch on the printer for the first time, it may make some noise.
  • Once you see the home screen, use the arrows next to the printer’s control panel to choose the language, country, and region. Now, touch the OK button.
  • The printer screen will now as you insert the ink cartridges.
  • Lift the ink cartridge’s cover by using the cutouts on the sides of your printer.
  • Look at the labeling on the back cover of the cartridge and install the tri-color cartridge initially.
  • Remove the protective tape covering the electrical contacts and ink nozzles. (NOTE: The color on the locking levers should match the color displayed on cartridges.)
  • Slide the ink cartridges slowly into their respective slots and push it till locks into its place.
  • Use the same process to install the black cartridge as well.
  • Once you finish installing the original HP cartridges, a message box appears on the Control Panel. Click on OK
  • Load the stack of paper in the input tray. Now, the printer prints an alignment page.
  • After the alignment page is printing, scan it by placing the pace print side down on the scanner glass.
  • Once the alignment page is scanned, a message box which reads, ‘Alignment successful’ will appear on the printer’s control panel. Press Ok button to continue.
  • Users are now allowed to connect the printer o a network wirelessly or Ethernet or USB.

Once the basic setup is complete, install the printer software by visiting 123.hp.com or by inserting the CD which came with the printer. Follow the instructions on the screen to complete the printer installation process. Download the driver software from the website link 123.hp.com/oj4650 or 123.hp.com/setup 4650.

Read more..

123.hp.com/setup iMac connect with printer

How to connect printer with mac?

  • Click on Setup and the select Network or Wireless menu.
  • From the list of options available, tap on Wireless Setup Wizard.
  • The list of wireless networks will be available on screen. Choose the one which you want to use.
  • When asked, enter the WEP password of the network key of the wireless connection.
  • Your printer will be connected to the wireless network soon. After it gets connected, print a test report to see if the printer works fine.
  • Also, it is not needed to install the MAC printer driver separately. It gets installed automatically when you update the Apple device software.
  • Now, connect your HP printer and your Apple device with the use of an USB connection.
  • Connect other devices to the Internet through wired or wireless connection.
  • Go to the Menu option in the Apple device and touch software update. Otherwise, choose About this Mac and then select Software updates.
  • Now, choose Install.

How to select your printer on your MAC?

  • Open the Apple menu and choose System Preferences.
  • Go to the Hardware tab and then choose Print and Fax.

When your HP printer is listed,

  • Roll your pointer on (-) minus sign and remove the printer. Now, click on the (+) sign and Add a new printer.
  • Choose the printer name when it appears on screen.
  • Now, click on OK to continue.

Read more..

123.hp.com/envy4500

123 HP SETUP 4500 WI-FI PROTECTED SETUP

REQUIREMENTS

  • A wireless 802.11/b/g/n network which includes WPS enabled access point or router.
  • A computer or laptop with wireless network connection or NIC (network interface card).
  • Your computer or laptop should be connected to the wireless network in which the printer is connected.

PUSH BUTTON METHOD (PBS)

  • Press and hold the Wireless button on the print for a couple of seconds to start the WPS button. Now, the wireless light starts blinking.
  • Now, press the WPS (Wi-Fi Protected Setup) button on your router.
  • The printer will take a couple of minutes to establish the wireless connection.

PIN METHOD

  • On the control panel, press the Wireless button to view the men.
  • If you see the printer in error state, or performing a task , wait until the printer finishes the tak and then press the Wireless button.
  • From the printer’s control panel display screen, choose Settings.
  • Now, touch Wi-Fi Protected Setup from the list of options available.
  • If you have a Push button on the wireless router, then clck Push Button and then follow the instructions.
  • If not, choose PIN and then follow the prompts displayed on-screen.

Read more..

123.hp.com/dj3630

Connecting a Wireless HP DJ3630 Printer

Un pack the 123.hp.com/dj3630 printer from its packaging and keep the power cords ready to connect in its respective places. Now, place the cords firmly into the wall sockets so that there are no loose connections or any power issues with the devices. After connecting the cords, press the Home button on the left hand corner of the printer.

How to set up the printer?

  • When you switch on the printer for the first time, it may make some noise.
  • Once you see the home screen, use the arrows next to the printer’s control panel to choose the language, country and region. Now, touch the OK button.
  • The printer screen will now as you insert the ink cartridges.
  • Lift the ink cartridge’s cover by using the cutouts on the sides of your printer.
  • Look at the labeling on the back cover of the cartridge and install the tri-color cartridge initially.
  • Remove the protective tap covering the electrical contacts and ink nozzles. (NOTE: The color on the locking levers should match the color displayed on cartridges.)
  • Slide the ink cartridges slowly into their respective slots and push it till locks into its place.
  • Use the same process to install the black cartridge as well.
  • Once you finish installing the original HP cartridges, a message box appears on the Control Panel. Click on OK
  • Load the stack of paper in the input tray. Now, the printer prints an alignment page.
  • After the alignment page is printing, scan it by placing the pace print side down on the scanner glass.
  • Once the alignment page is scanned, a message box which reads, ‘Alignment successful’ will appear on the printer’s control panel. Press Ok button to continue.
  • Users are now allowed to connect the printer o a network wirelessly or Ethernet or USB.

View more about 123.hp.com/setup OJ3630

123.hp.com/oj5740

123 HP OFFICEJET 5740 WIRELESS INSTALLATION

With the use of HP wireless direct, users can print wireless from a smart phone, tablet, computer or other wireless-enabled devices – without even connecting to an existing wireless network.

You can manage the wireless connection to your 123.hp.com/oj5740 printer by using the Wireless Setup Wizard.

  • Press the Wireless icon on the printer’s control panel.
  • Click the button that is next to the print settings.
  • Click OK by scrolling the Wireless Setup Wizard. Now, the wizard searches the list of available networks.
  • Check if the name of your network is available. If not, users can enter the network manually.
  • Scroll to Enter New Network Name and then click OK.
  • Enter the name and then press OK.
  • When asked, mention the WEP or WPA key.
  • Click OK to confirm. Now, the printer attempts to connect to the network.
123.hp.com/dj3755

123 HP Deskjet 3755 Printer Setup and Installation

Un pack the 123.hp.com/dj3755 printer from its packaging and keep the power cords ready to connect in its respective places. Now, place the cords firmly into the wall sockets so that there are no loose connections or any power issues with the devices. After connecting the cords, press the Home button on the left-hand corner of the printer.

How to set up the printer?

  • When you switch on the printer for the first time, it may make some noise.
  • Once you see the home screen, use the arrows next to the printer’s control panel to choose the language, country, and region. Now, touch the OK button.
  • The printer screen will now as you insert the ink cartridges.
  • Lift the ink cartridge’s cover by using the cutouts on the sides of your printer.
  • Look at the labeling on the back cover of the cartridge and install the tri-color cartridge initially.
  • Remove the protective tape covering the electrical contacts and ink nozzles. (NOTE: The color on the locking levers should match the color displayed on cartridges.)
  • Slide the ink cartridges slowly into their respective slots and push it till locks into its place.
  • Use the same process to install the black cartridge as well.
  • Once you finish installing the original HP cartridges, a message box appears on the Control Panel. Click on OK
  • Load the stack of paper in the input tray. Now, the printer prints an alignment page.
  • After the alignment page is printing, scan it by placing the pace print side down on the scanner glass.
  • Once the alignment page is scanned, a message box which reads, ‘Alignment successful’ will appear on the printer’s control panel. Press Ok button to continue.
  • Users are now allowed to connect the printer o a network wirelessly or Ethernet or USB

Once the basic setup is complete, install the printer software by visiting 123.hp.com or by inserting the CD which came with the printer. Follow the instructions on the screen to complete the printer installation process. Download the driver software from the website link 123.hp.com/dj3755 or 123.hp.com/setup 3755.

Read More..

 

123.hp.com/setup 7640

HP ENVY 7640 WIRELESS INSTALLATION

With the use of HP wireless direct, users can print wirelessly from a smart phone, tablet, computer or other wireless-enabled devices – without even connecting to an existing wireless network.

You can manage the wireless connection to your 123.hp.com/envy7640 printer by using the Wireless Setup Wizard.

  • Press the Wireless icon on the printer’s control panel.
  • Click the button that is next to the print settings.
  • Click OK by scrolling the Wireless Setup Wizard. Now, the wizard searches the list of available networks.
  • Check if the name of your network is available. If not, users can enter the network manually.
  • Scroll to entering New Network Name and then click OK.
  • Enter the name and then press OK.
  • When asked, mention the WEP or WPA key.
  • Click OK to confirm. Now, the printer attempts to connect to the network.

Read more..